# -*- coding: utf-8-*-
#
# This file is part of stdd, the simple time display daemon,
# written by Helmut Pozimski <helmut@pozimski.eu>,
# licensed under the 3-clause BSD license
# This file was originally written by Written by Limor Fried, Kevin Townsend
# and Mikey Sklar for Adafruit Industries. BSD license,
# all text above must be included in any redistribution

import smbus

# ===========================================================================
# Adafruit_I2C Class
# ===========================================================================


class Adafruit_I2C:

    @staticmethod
    def getPiRevision():
        "Gets the version number of the Raspberry Pi board"
        # Courtesy quick2wire-python-api
        # https://github.com/quick2wire/quick2wire-python-api
        try:
            with open('/proc/cpuinfo', 'r') as f:
                for line in f:
                    if line.startswith('Revision'):
                        return 1 if line.rstrip()[-1] in ['1', '2'] else 2
        except:
            return 0

    @staticmethod
    def getPiI2CBusNumber():
        # Gets the I2C bus number /dev/i2c#
        return 1 if Adafruit_I2C.getPiRevision() > 1 else 0

    def __init__(self, address, busnum=-1, debug=False):
        self.address = address
        # By default, the correct I2C bus is auto-detected using /proc/cpuinfo
        # Alternatively, you can hard-code the bus version below:
        # self.bus = smbus.SMBus(0); # Force I2C0 (early 256MB Pi's)
        # self.bus = smbus.SMBus(1); # Force I2C1 (512MB Pi's)
        self.bus = smbus.SMBus(
            busnum if busnum >= 0 else Adafruit_I2C.getPiI2CBusNumber())
        self.debug = debug

    def reverseByteOrder(self, data):
        "Reverses the byte order of an int (16-bit) or long (32-bit) value"
        # Courtesy Vishal Sapre
        byteCount = len(hex(data)[2:].replace('L', '')[::2])
        val = 0
        for i in range(byteCount):
            val = (val << 8) | (data & 0xff)
            data >>= 8
        return val

    def errMsg(self):
        print "Error accessing 0x%02X: Check your I2C address" % self.address
        return -1

    def write8(self, reg, value):
        "Writes an 8-bit value to the specified register/address"
        try:
            self.bus.write_byte_data(self.address, reg, value)
            if self.debug:
                print "I2C: Wrote 0x%02X to register 0x%02X" % (value, reg)
        except IOError, err:
            return self.errMsg()

    def write16(self, reg, value):
        "Writes a 16-bit value to the specified register/address pair"
        try:
            self.bus.write_word_data(self.address, reg, value)
            if self.debug:
                print ("I2C: Wrote 0x%02X to register pair 0x%02X,0x%02X" %
                      (value, reg, reg+1))
        except IOError, err:
            return self.errMsg()

    def writeList(self, reg, list):
        "Writes an array of bytes using I2C format"
        try:
            if self.debug:
                print "I2C: Writing list to register 0x%02X:" % reg
                print list
            self.bus.write_i2c_block_data(self.address, reg, list)
        except IOError, err:
            return self.errMsg()

    def readList(self, reg, length):
        "Read a list of bytes from the I2C device"
        try:
            results = self.bus.read_i2c_block_data(self.address, reg, length)
            if self.debug:
                print ("I2C: Device 0x % 02X returned the following from \
                       reg 0x % 02X" % (self.address, reg))
                print results
            return results
        except IOError, err:
            return self.errMsg()

    def readU8(self, reg):
        "Read an unsigned byte from the I2C device"
        try:
            result = self.bus.read_byte_data(self.address, reg)
            if self.debug:
                print ("I2C: Device 0x%02X returned 0x%02X from reg 0x%02X" %
                      (self.address, result & 0xFF, reg))
            return result
        except IOError, err:
            return self.errMsg()

    def readS8(self, reg):
        "Reads a signed byte from the I2C device"
        try:
            result = self.bus.read_byte_data(self.address, reg)
            if result > 127: result -= 256
            if self.debug:
                print ("I2C: Device 0x%02X returned 0x%02X from reg 0x%02X" %
                       (self.address, result & 0xFF, reg))
            return result
        except IOError, err:
            return self.errMsg()

    def readU16(self, reg):
        "Reads an unsigned 16-bit value from the I2C device"
        try:
            hibyte = self.readU8(reg)
            lobyte = self.readU8(reg+1)
            result = (hibyte << 8) + lobyte
            if (self.debug):
                print "I2C: Device 0x%02X returned 0x%04X from reg 0x%02X" % (
                    self.address, result & 0xFFFF, reg)
            return result
        except IOError, err:
            return self.errMsg()

    def readS16(self, reg):
        "Reads a signed 16-bit value from the I2C device"
        try:
            hibyte = self.readS8(reg)
            lobyte = self.readU8(reg+1)
            result = (hibyte << 8) + lobyte
            if (self.debug):
                print "I2C: Device 0x%02X returned 0x%04X from reg 0x%02X" % (
                    self.address, result & 0xFFFF, reg)
            return result
        except IOError, err:
            return self.errMsg()

    def readU16Rev(self, reg):
        "Reads an unsigned 16-bit value from the I2C device with rev byte ord"
        try:
            lobyte = self.readU8(reg)
            hibyte = self.readU8(reg+1)
            result = (hibyte << 8) + lobyte
            if (self.debug):
                print "I2C: Device 0x%02X returned 0x%04X from reg 0x%02X" % (
                    self.address, result & 0xFFFF, reg)
            return result
        except IOError, err:
            return self.errMsg()

    def readS16Rev(self, reg):
        "Reads a signed 16-bit value from the I2C device with rev byte order"
        try:
            lobyte = self.readS8(reg)
            hibyte = self.readU8(reg+1)
            result = (hibyte << 8) + lobyte
            if (self.debug):
                print "I2C: Device 0x%02X returned 0x%04X from reg 0x%02X" % (
                    self.address, result & 0xFFFF, reg)
            return result
        except IOError, err:
            return self.errMsg()

if __name__ == '__main__':
    try:
        bus = Adafruit_I2C(address=0)
        print "Default I2C bus is accessible"
    except:
        print "Error accessing default I2C bus"